• What Is The Regulation Size Of A Craps Table Set
• What Is The Regulation Size Of A Craps Table Top

After close measurement of tables I have determined that most tables are either 12 feet or 14 feet in length. This dimension is the length measured from outside chip rail to outside chip rail. The length from rubber to rubber is about 10 inches less. I have never seen a sixteen foot table but have heard that they do exist.

We gather details of all the table games available at every Las Vegas casino. We confirm the rules, including minimum and maximum bets, and various other information. If there are any special rules, like the number of zeros on a roulette wheel or odds on line bets at a craps table, we note that, too. All the collected data goes into spreadsheets. Standard casino craps tables (i.e., not the oddly shaped or much smaller specialty tables) are typically 8, 10, or 12 feet long. Most casinos use the long 12-foot tables to accommodate the maximum number of players. Each end of a 12-foot table can hold up to eight players; therefore, the casino can have as many as 16 people playing at a time. Apr 12, 2017 The roulette layout should be 36 inches by 72 inches. Felt roulette layouts can be found in game and billiard stores as well as online at the link below. Roulette wheels can be purchased online at the link below. Roulette wheels vary drastically in quality and price. The Craps Table Layout. A standard craps table layout comprises two sections: Side section (there are two identical side sections, one on each end of the table), and; Center section. Each side section is manned by a dealer. The center section is manned by the stickman.

set up on top of a standard 28' folding table

Because my interest in is playing craps, not wood working, I wanted to make this as simply as possible, yet still attractive. The solution was to use as much ready made material as possible. The sides are 10'x24' wood grain ready-made shelves from Home Depot - the back is a 12'x24' ready made shelf.

The table is 5/16' particle board, which I had cut at Home Depot into two pieces each 24'x16'. On the top side under the felt there are two hinges at the far left and right to join the two base pieces.

The back and sides attach with velcro for easy disassembly.

The back has a regulation craps rubber, and the table is covered with a single layer of a felt craps layout (small size, obviously). Both are affixed with 3M Spray Adhesive. The rubber and layout were purchased from the now defunct CasinoDiscountSupplies.com, but the material is readily available.

COMMENTS: The single layer of felt makes this a fairly hard craps surface - and a harder surface can be more challenging to play on. However, the thinking is that a practice station should provide as much 'challenge' as possible to best emulate worst case real world situations.

Here it is with the sides and back removed. Notice the black velcro on or near the edges.

What Is The Regulation Size Of A Craps Table Set

Here we see the main table folding in half. The hinges are
at the far left and right, and slightly recessed in the wood.
I opted to fold in this direction to keep the felt continuous.
Folded it's 16' x 24', and unfolded, it 24' x 32'.

Here the table is folded in half, and the sides/back are stacked on top.
The total size of this pile is 16' x 24' x 4' - an easy fit for most regular suitcases.

set up on top of a standard 28' folding table

Because my interest in is playing craps, not wood working, I wanted to make this as simply as possible, yet still attractive. The solution was to use as much ready made material as possible. The sides are 10'x24' wood grain ready-made shelves from Home Depot - the back is a 12'x24' ready made shelf.

The table is 5/16' particle board, which I had cut at Home Depot into two pieces each 24'x16'. On the top side under the felt there are two hinges at the far left and right to join the two base pieces.

The back and sides attach with velcro for easy disassembly.

The back has a regulation craps rubber, and the table is covered with a single layer of a felt craps layout (small size, obviously). Both are affixed with 3M Spray Adhesive. The rubber and layout were purchased from the now defunct CasinoDiscountSupplies.com, but the material is readily available.

COMMENTS: The single layer of felt makes this a fairly hard craps surface - and a harder surface can be more challenging to play on. However, the thinking is that a practice station should provide as much 'challenge' as possible to best emulate worst case real world situations.

Here it is with the sides and back removed. Notice the black velcro on or near the edges.

Here we see the main table folding in half. The hinges are
at the far left and right, and slightly recessed in the wood.
I opted to fold in this direction to keep the felt continuous.
Folded it's 16' x 24', and unfolded, it 24' x 32'.

What Is The Regulation Size Of A Craps Table Top

Here the table is folded in half, and the sides/back are stacked on top.
The total size of this pile is 16' x 24' x 4' - an easy fit for most regular suitcases.